| |
|
| |
|
| |
It generates 0-10V DC analog signal
(factory set) proportional to the rpm of the Tacho-generator
shaft. 10V output can be given at the maximum specified
rpm which can be from 5 rpm to 6000 rpm. Alternatively a current
signal of 4-20 mA or 0-20 mA can also be provided instead of
voltage output. |
| |
 |
| |
|
| |
 |
| |
|
| |
|
|
|
| |
| Output |
| O/P Pulses |
Up to 1024 PPR (Optional) |
| Mounting |
Servo/Face Mounting by 3 screws of M-4,
120 degree apart on a PCD of 42mm dia. |
| Dimensions |
Body Dia.=58 mm, Depth=67mm (Excluding
Shaft & cable gland). |
|
| |
|
|
|
| |
| Specifications |
| SUPPLY
VOLTAGE |
24V DC (±20%) ripple
free |
| OUTPUT |
0-10 V DC, 4-20 mA, 0-20 mA (proportional
to shaft rpm) |
OUTPUT PULSES
Single channel (optional)
|
120 PPR (standard) |
| OUTPUT LINEARITY |
± 0.3% |
| OUTPUT CURRENT |
50 mA max. at full output. |
| OUTPUT LOAD (max.) |
200 Ohm |
| OUTPUT CABLE LENGTH |
1 meter (Standard) |
| MECHANICAL BODY |
Machined Aluminium body in anodised finish.
|
| SHAFT |
Stainless steel (SS-304) of 6 mm. dia.,
12 mm long. |
| PROTECTION CLASS |
Weather proof as per IP-64 |
|
| |
|
| |
|
| |
| Due
to continuous development & improvements, Illustration/Specifications
are subject to change without notice |
|
| |
|
|
|
|
